Test sieve with aluminium frame
NEXOPART Test sieve with frame made from aluminium acc. to DIN EN 933-3 with parallel cylindric bars.
NEXOPART Test sieve with frame made from aluminium acc. to DIN EN 933-3 with parallel cylindric bars.
| Diameter | 300 |
| Nominal height | 75 |
| Standard | Without standard |
| Test sieve type | Grid sieve |
NEXOPART test sieves.
In addition to our standard test sieves, our range of NEXOPART sieves also includes stainless steel grain and tobacco test sieves as well as square wooden frame sieves. The particularly smooth surface of our frames prevents cross contamination and the sieve wire cloth retains its tension exceedingly well even after intensive use. Manual sieving, conventional sieving, wet or dry sieving: Analyze bulk materials from 10 µm to 125 mm with NEXOPART.
Difference between certification, calibration and DAkkS calibration according to DIN standard
| Certification | Measurement of the test sieves using an optical measuring system in the 20 µm - 2.0 mm range |
| Mesh and hole widths > 2.0 mm using a caliper gauge | |
| Standards: ISO 3310-1 and ISO 3310-2, ASTM E11 | |
| Electroformed sheet ISO 3310-3 > 20 µm | |
| Calibration | Up to 3 x more meshes are measured compared to certification |
| Measurement of the test sieves using an optical measuring system in the 20 µm - 2.0 mm range | |
| Mesh and hole widths > 2.0 mm using a caliper gauge | |
| Standards: ISO 3310-1 and ISO 3310-2, ASTM E11 | |
| DAkks Calibration | Measurement of test sieves using accredited measuring equipment |
| laboratory is accredited in accordance with DIN EN ISO /IEC 17025 DAkkS | |
| Calibration is carried out under special measuring conditions in accordance with ISO 3310-1 for test sieves |
Download for the NEXOPART test sieves.
Data Sheet
Learn more about the most important properties of the NEXOPART test sieves here.
Accessories for the NEXOPART test sieves.
Description
NEXOPART Test sieve with frame made from aluminium acc. to DIN EN 933-3 with parallel cylindric bars.
NEXOPART test sieves.
In addition to our standard test sieves, our range of NEXOPART sieves also includes stainless steel grain and tobacco test sieves as well as square wooden frame sieves. The particularly smooth surface of our frames prevents cross contamination and the sieve wire cloth retains its tension exceedingly well even after intensive use. Manual sieving, conventional sieving, wet or dry sieving: Analyze bulk materials from 10 µm to 125 mm with NEXOPART.
Difference between certification, calibration and DAkkS calibration according to DIN standard
| Certification | Measurement of the test sieves using an optical measuring system in the 20 µm - 2.0 mm range |
| Mesh and hole widths > 2.0 mm using a caliper gauge | |
| Standards: ISO 3310-1 and ISO 3310-2, ASTM E11 | |
| Electroformed sheet ISO 3310-3 > 20 µm | |
| Calibration | Up to 3 x more meshes are measured compared to certification |
| Measurement of the test sieves using an optical measuring system in the 20 µm - 2.0 mm range | |
| Mesh and hole widths > 2.0 mm using a caliper gauge | |
| Standards: ISO 3310-1 and ISO 3310-2, ASTM E11 | |
| DAkks Calibration | Measurement of test sieves using accredited measuring equipment |
| laboratory is accredited in accordance with DIN EN ISO /IEC 17025 DAkkS | |
| Calibration is carried out under special measuring conditions in accordance with ISO 3310-1 for test sieves |
Download for the NEXOPART test sieves.
Data Sheet
Learn more about the most important properties of the NEXOPART test sieves here.